The Switch is switched off once the temperature falls below 18 and then it is turned on when the

temperature is more than 21. When the temperature is more than 21. Identify the Equivalance values which belong to the same class.

a) 12,16,22

b) 24,27,17

c) 22,23,24

d) 14,15,19

Views: 24

Reply to This

Replies to This Discussion

it should be C) 22,23,24

the question states "When the temperature is more than 21. Identify the Equivalance values which belong to the same ". so here we need values which represent the same class.

there are 3 classes

A set of values, when temp is < 18
A set of values, when temp is > 21
A set of values, when 21<=temp is >=18

so class which represents "A set of values, when temp is > 21" is C (22,23,24)
Good answer with explanation.
The answer is C.
Is this really a question to be asked here in this forum.....?

to Answer it is : C - 22,23,24

Class I: < 18 (switch off)
Class II: 18 to 21
Class III: >21 (switch on)

Yr question also needs some CLARITY what is the status of switch if temp is between 18 and 21 ? WILL IT FLUCTUATE OR WHAT? :-) :-)
corrct answer and explanation dude :)
Yes the Ans. is c). 22, 23, 24.

In your case there are three equivalance sets are there.

First class is < =18( because requirement is not defined the lower limit)

Second class is >18 & <21 (in this class if the switch is on when it enters in set of values the switch is in ON state only. If the switch is in OFF state while entering in this set of values it will be in OFF state) So we call this state as stable/nutral/nochange state, i.e. the state/status of the swith will be carried as it is when it enters this set of values.

Third cass is >=21 ( because requireent is not defined the upper limit).

I appreciate Mr. Kesanupalli for posting a good question to our community members.
Answer is: c) 22,23,24

The various conditions identified are:
1. <18

The answer (c) has the temperature that falls in the same condition. (i.e) >21

Hi kesanupalli,

 the replies i seen are good and correct,

Actually there is no difficulty in the question because you already mentioned that , the ECP for "temperature more than 21", so out of four options "C" has all numbers more than 21

so c is the answer

but if you doesn't mention the temperature like more than 21and if you ask the question like this

1. <18                  3% of temp

2.18<=  =>21      5% of temp

3.21<                   10% of temp

then there will be confusion in which way we need to partition the class.....

Try in this way and enjoy....


© 2014   Created by Test Republic.

Badges  |  Report an Issue  |  Terms of Service